Name: GOOMi 3D Silicone LED Light Therapy Mask
Brand: Dr. Pen Australia
SKU: GM-LED-M051
Price: 299.0 AUD
Availability: InStock

Free shipping over $99

Fast dispatch, click & collect available*

Buy now, pay later

1-year warranty, lifetime support

Free shipping over $99

Fast dispatch, click & collect available*

Buy now, pay later

1-year warranty, lifetime support

Free shipping over $99

Fast dispatch, click & collect available*

Buy now, pay later

1-year warranty, lifetime support

Free shipping over $99

Fast dispatch, click & collect available*

Buy now, pay later

1-year warranty, lifetime support

Free shipping over $99

Fast dispatch, click & collect available*

Buy now, pay later

1-year warranty, lifetime support

33%

GOOMi 3D Silicone LED Light Therapy Mask

Save 33%

Good for:

Acne & Blemishes Anti-Ageing Fine Lines & Wrinkles Hyperpigmentation Redness Toning & Firming

Estimated delivery by

USED IN SALONS

Trusted by professionals

FREE AUS SHIPPING

Over $99.00

TGA-registered (ARTG 524063) LED light therapy Face Mask with an Extended Contoured Fit.

Meet a more comfortable way to bring LED into your skincare routine. The GOOMi 3D Wireless Silicone LED Light Therapy Mask is an at-home LED face mask designed to support smoother-looking, more radiant skin. Its ultra-thin, flexible, food-grade silicone follows your face's contours, with a shaped fit that extends below the chin. This allows light to naturally spill onto the neck and upper décolleté as well as the face during each session, without needing a separate panel.

Combining 4 light wavelengths (red, blue, green and near-infrared) into 9 targeted treatment modes, this mask delivers professional-grade phototherapy in a hands-free 10-minute session. Each mode uses different combinations of wavelength channels with precisely measured irradiance output, including:

Red Light: 20mW/cm² output (tested range: 18–26mW/cm²)
Infrared Light: 4mW/cm² output (tested range: 3.6–5.2mW/cm²)
Blue Light: 35mW/cm² output (tested range: 31.5–45.5mW/cm²)
Red + Infrared Light: 35mW/cm² output (tested range: 31.5–45.5mW/cm²)
Red + Blue Light: 40mW/cm² output (tested range: 36–52mW/cm²)

Reference: FDA clearance

Disclaimer
Please speak with your doctor before purchasing any Dr. Pen products. The content on this site is not intended to substitute for the advice of a qualified physician, pharmacist, or other licensed health-care professional. The products may have additional information and instructions on or inside the packaging that you should carefully read and follow.
Contact your health-care provider immediately if you suspect that you have a medical problem.

TGA-registered (ARTG 524063) LED light therapy Face Mask with an Extended Contoured Fit.

Meet a more comfortable way to bring LED into your skincare routine. The GOOMi 3D Wireless Silicone LED Light Therapy Mask is an at-home LED face mask designed to support smoother-looking, more radiant skin. Its ultra-thin, flexible, food-grade silicone follows your face's contours, with a shaped fit that extends below the chin. This allows light to naturally spill onto the neck and upper décolleté as well as the face during each session, without needing a separate panel.

Combining 4 light wavelengths (red, blue, green and near-infrared) into 9 targeted treatment modes, this mask delivers professional-grade phototherapy in a hands-free 10-minute session. Each mode uses different combinations of wavelength channels with precisely measured irradiance output, including:

Red Light: 20mW/cm² output (tested range: 18–26mW/cm²)
Infrared Light: 4mW/cm² output (tested range: 3.6–5.2mW/cm²)
Blue Light: 35mW/cm² output (tested range: 31.5–45.5mW/cm²)
Red + Infrared Light: 35mW/cm² output (tested range: 31.5–45.5mW/cm²)
Red + Blue Light: 40mW/cm² output (tested range: 36–52mW/cm²)

Reference: FDA clearance

Disclaimer
Please speak with your doctor before purchasing any Dr. Pen products. The content on this site is not intended to substitute for the advice of a qualified physician, pharmacist, or other licensed health-care professional. The products may have additional information and instructions on or inside the packaging that you should carefully read and follow.
Contact your health-care provider immediately if you suspect that you have a medical problem.

FDA 510(k) Cleared & TGA Certified:
Evaluated and approved by top global medical device regulatory authorities for safety, quality, and clinical-grade performance.
Ergonomic 3D Contour Fit:
Crafted from ultra-thin, food-grade flexible silicone that molds closely to your facial features for maximum light absorption and minimal energy loss.

Breathable Airflow Design:
Engineered with dedicated nose and mouth airflow vents for comfortable, effortless breathing during every session.

Extended Jawline Coverage:
Reaches below the chin so therapeutic light naturally spills onto the neck and upper décolleté.

280 High-Efficiency LEDs & 9 Modes:
70 dual-chip LED units emit four clinical wavelengths (465nm, 530nm, 630nm, 850nm) combined into 9 custom treatment modes.

Spectrometer-Tested Power Output:
Independently verified with an OHSP-350IR spectrometer, delivering real irradiance ranging from 36mW/cm² up to 54mW/cm².

Cord-Free Freedom & Smart Control:
Built-in 2000mAh rechargeable battery charges via USB-C in ~3.5 hours, providing up to 90 minutes of wireless runtime. Operates effortlessly via the mask’s integrated power button or the included LCD remote control.

Automatic 10-Minute Timer:
Pre-programmed 10-minute session automatically switches off when complete, giving you a completely hands-free routine.

• Smoother-Looking Fine Lines & Wrinkles:
Combined red and near-infrared modes support the appearance of softer-looking fine lines and firmer, smoother-looking skin over time.
• Refresh a dull-looking complexion
Green and yellow modes help calm the look of redness and support a brighter, more even-looking complexion.
• A Clearer-Looking Complexion:
Blue mode helps calm the appearance of blemish-prone skin as part of your regular routine.
• Face, Neck and Décolletage in One Session:
Extended coverage means you're not limited to the face alone, light spills naturally onto the neck and upper décolletage too.
• A Routine That Fits Real Life:
Cordless, hands-free and done in 10 minutes, so it layers easily into an existing skincare routine, morning or night.

What Are the 9 Light Modes on the GOOMi LED Face Mask?

Each mode pairs a clinical wavelength with a cosmetic, appearance-based benefit. Use this as a guide to build a routine around your skin's needs on any given day.

Mode	Wavelength	What It Supports
M1	Red + NIR (630 + 850 nm)	Helps reduce the look of fine lines and wrinkles while supporting the appearance of healthy circulation and skin renewal.
M2	Red (630 nm)	Supports the skin's natural renewal process for a more energised, refreshed-looking complexion.
M3	Near-Infrared (850 nm)	Reaches deeper into the skin to support the look of a firmer, softer complexion.
M4	Blue (465 nm)	Helps calm the appearance of blemish-prone skin for a clearer-looking complexion.
M5	Green (530 nm)	Helps calm the look of redness and supports a more even-looking skin tone.
M6	Purple (465 + 630 nm)	Combines blue and red light for a complexion that looks firmer and more refined.
M7	Teal / Cyan (465 + 530 nm)	Supports the appearance of revitalised, healthy-looking skin.
M8	Yellow (630 + 530 nm)	Helps refresh the look of tired skin and calm the appearance of irritation, ideal after a late night or sun exposure.
M9	White (465 + 530 + 630 nm)	Combines three core wavelengths in one session to support smoother, healthier-looking skin overall.

• GOOMi 3D Silicone LED Light Therapy Mask
• Wireless remote control
• USB-C charging cable
• User manual

Specification	Details
Product type	Wireless LED light therapy face mask
Material	Flexible, ultra-thin food-grade silicone with 3D contour design
Net weight	320 g
Intended area	Face, with extended coverage below the chin for neck and upper décolleté exposure
LED quantity	280 high-efficiency LEDs (70 dual-chip LED units)
Wavelengths	Blue: 465 nm; Green: 530 nm; Red: 630 nm; Near-infrared: 850 nm
Light modes	9 selectable LED programs (M1–M9), including: Red Light: 20 mW/cm² output (tested range: 18–26 mW/cm²) Infrared Light: 4 mW/cm² output (tested range: 3.6–5.2 mW/cm²) Blue Light: 35 mW/cm² output (tested range: 31.5–45.5 mW/cm²) Red + Infrared Light: 35 mW/cm² output (tested range: 31.5–45.5 mW/cm²) Red + Blue Light: 40 mW/cm² output (tested range: 36–52 mW/cm²)
Irradiance output	Spectrometer-tested optical output with irradiance ranging approximately from 36–54 mW/cm² across selected modes.
Session timer	Automatic 10-minute session timer
Controls	Integrated mask power button and wireless LCD remote control for mode selection
Remote power control	Remote controls mode selection only and cannot power the mask on or off
Battery capacity	2000 mAh rechargeable battery
Cordless runtime	Up to 90 minutes per full charge
Charging connection	USB-C charging; DC 5V / 1A input
Charging time	Approximately 3.5 hours
Use while charging	Not permitted
Water resistance	Not water-resistant. Do not submerge.
Regulatory reference	FDA 510(k) Cleared (K253712). View FDA Clearance Documentation

*Irradiance values represent approximate output measurements with a tolerance range of -10%/+30%. Optical output figures are provided for device specifications and are not a guarantee of cosmetic results.

Step 1 (Cleanse):
Start with clean, dry skin. Remove makeup and cleanse thoroughly before every session.

Step 2 (Position & Adjust):
Rest the mask over your face and adjust the strap for a comfortable, snug fit.

Step 3 (Power On):
Press and hold the power button on the mask for 2 seconds. A single beep and a flashing green light confirm standby mode.

Step 4 (Choose Mode):
Briefly press the power button on the mask or the M button on the remote control to cycle through modes M1–M9.

Step 5 (Relax for 10 Mins):
The built-in timer automatically runs the 10-minute session and turns off when complete.

Step 6 (Power Off):
Press and hold the power button on the mask for 5 seconds to switch off completely. (Note: The remote control changes modes but cannot power the device on or off).

Step 7 (Finish Routine):
Follow with your usual skincare routine (serum or moisturizer).

Who Can Use LED Light Therapy?

Great for:

Adults seeking a gentle, non-invasive, at-home light therapy routine.
Fine lines, wrinkles, dullness, uneven tone, and everyday skin maintenance.
Anyone who prefers a soft, contoured 3D silicone mask over rigid shells.
Layering into an existing skincare routine.

Please check with your doctor before use if you:

Use implanted medical electronic devices (e.g., pacemakers, ECG equipment, artificial heart-lung machines).
Have a history of heart disease, abnormal blood pressure, epilepsy, or mental illness.
Have a history of skin cancer, facial melanoma, malignant tumors, or pre-cancerous moles.
Are photosensitive, have an autoimmune condition, active infection, diabetes, or severe skin conditions (e.g., hyperpigmentation, contact dermatitis).
Have had Botox or dermal fillers within the past 3 months, or recently undergone chemical peels/laser treatments.
Take photosensitizing medications, long-term steroid treatments, or use topical acid-based skincare (AHAs/BHAs) on the treatment area.

This product is not intended to diagnose, treat, cure or prevent any disease or medical condition. For any health concerns, speak with your doctor, GP or dermatologist before use.

Care, Maintenance & Storage

Cleaning: Lightly dampen a clean, non-woven or lint-free cloth with alcohol and gently wipe any dusty areas. The device is not water-resistant; never submerge in water.
Storage: Store securely in its original packaging after each use to protect from dust and damage. Do not fold, compress, or place heavy objects on the silicone mask.
Safety: Keep stored safely out of reach of children. Use only on the face as intended.