Stayve Seanergy Peel Solution & Powder Kit

SKU: DP-STAYVE-PEEL

Stayve Seanergy Peel Solution & Powder Kit

SKU: DP-STAYVE-PEEL
$259.00 Regular price
/
Good for:
Acne & Blemishes Scarring
Dr. Pen Holiday Sale is ON!

Up to 15% OFF almost everything + Up to 40% OFF curated picks. Prices as marked — no code needed.

Limited time only. T&Cs and exclusions apply (expand to view full T&Cs).

Up to 40% OFF Curated Picks Collection: click here to view collection.

T&Cs:
Valid only for
drpen.com.au until 29/12/2025 11:59 pm AWST. No code required. Prices as marked. Offer excludes bundles and A20 collection. Cannot be used in conjunction with any other offer. Promo price and free gifts while stocks last. No rainchecks. Dr. Pen Global reserves the right to amend any promotional offer.

Estimated delivery by

USED IN SALONS

Trusted by professionals

FREE AUS SHIPPING

Over $99.00

Coral spicule peel stimulates natural regeneration and improves texture. Ideal for acne and scar care.

The Stayve Seanergy Peel Solution & Powder Kit is a unique deep-peeling system powered by Coral Calcium “Spicules”—micro-particles naturally derived from seaweed that work inside the dermis for 36–48 hours. Also known as the FCR (Fractional Prickle Coral Calcium Regeneration) Peel, this treatment stimulates the skin’s natural repair cycle by creating controlled micro-wounds.

As the spicules activate dormant dermal cells, the skin increases its production of collagen, elastin, oxygen, and immune-supporting cells. Seanergy Peel promotes natural skin turnover, encouraging healthier, smoother, more radiant skin from within. Rather than unnatural exfoliating effects, it helps to restore the original health of the skin by peeling off dead skin cells for 3 days by natural skin activation. You can mix Stayve Seanergy Peel Powder and Solution mix to start peeling. The depth of peeling is determined by the intensity of rubbing and the duration of the massage.

The peeling intensity can be customised by adjusting the powder-to-solution ratio and the duration of massage, making it suitable for different skin types and concerns—especially those seeking acne & scar management care, texture refinement, or enhanced skin vitality.

Frequently Asked Questions

1) Will I be able to see the effect with just one session of treatment?

The skin brightens and the skin circulation happens due to the micro-particles after one session, and you’ll be able to see improved skin condition after 5 ~ 7 days. But, this can vary by an individual’s skin condition and usage strength.

2) How often can I use?

When rubbing is done with proper pressure and time, you can use it in 8 week intervals. When the exfoliating is noticeably proceeding with wide ranges of area, it is better to do the next treatment after 10 weeks.

3) Can I use it on the other areas than face?

It is ideal to use on the front of the chest, back, and arms where there are troubles. But do not use it on areas with scars or bad infections.

4) The redness lasts very long. How should I take care of it?

It is natural when redness happens after the peeling. Drink a lot of water and avoid alcohol and sports that make you sweat a lot for around 5 days after the treatment. However, if the redness continues for more than 48 hours, or if it gets worse, consult with the dermatologist immediately.

5) Is it possible to not see any dead skin cells appear? How much exfoliation appears?

The exfoliation might not happen depending on the skin age and skin layers’ thickness.

Oily skin or skin with thick skin layers tends to exfoliate more, while dry skin or skin with thin skin layers tends to exfoliate less. Mild peeling is recommended for the skin with thin skin layers.

6) Can I use it when my skin is sensitive?

It can be used for sensitive skin too unless they are allergic to spicule. This product is not to make the skin sensitive, but to improve it, and therefore making your skin healthy.

Coral spicule peel stimulates natural regeneration and improves texture. Ideal for acne and scar care.

The Stayve Seanergy Peel Solution & Powder Kit is a unique deep-peeling system powered by Coral Calcium “Spicules”—micro-particles naturally derived from seaweed that work inside the dermis for 36–48 hours. Also known as the FCR (Fractional Prickle Coral Calcium Regeneration) Peel, this treatment stimulates the skin’s natural repair cycle by creating controlled micro-wounds.

As the spicules activate dormant dermal cells, the skin increases its production of collagen, elastin, oxygen, and immune-supporting cells. Seanergy Peel promotes natural skin turnover, encouraging healthier, smoother, more radiant skin from within. Rather than unnatural exfoliating effects, it helps to restore the original health of the skin by peeling off dead skin cells for 3 days by natural skin activation. You can mix Stayve Seanergy Peel Powder and Solution mix to start peeling. The depth of peeling is determined by the intensity of rubbing and the duration of the massage.

The peeling intensity can be customised by adjusting the powder-to-solution ratio and the duration of massage, making it suitable for different skin types and concerns—especially those seeking acne & scar management care, texture refinement, or enhanced skin vitality.

Frequently Asked Questions

1) Will I be able to see the effect with just one session of treatment?

The skin brightens and the skin circulation happens due to the micro-particles after one session, and you’ll be able to see improved skin condition after 5 ~ 7 days. But, this can vary by an individual’s skin condition and usage strength.

2) How often can I use?

When rubbing is done with proper pressure and time, you can use it in 8 week intervals. When the exfoliating is noticeably proceeding with wide ranges of area, it is better to do the next treatment after 10 weeks.

3) Can I use it on the other areas than face?

It is ideal to use on the front of the chest, back, and arms where there are troubles. But do not use it on areas with scars or bad infections.

4) The redness lasts very long. How should I take care of it?

It is natural when redness happens after the peeling. Drink a lot of water and avoid alcohol and sports that make you sweat a lot for around 5 days after the treatment. However, if the redness continues for more than 48 hours, or if it gets worse, consult with the dermatologist immediately.

5) Is it possible to not see any dead skin cells appear? How much exfoliation appears?

The exfoliation might not happen depending on the skin age and skin layers’ thickness.

Oily skin or skin with thick skin layers tends to exfoliate more, while dry skin or skin with thin skin layers tends to exfoliate less. Mild peeling is recommended for the skin with thin skin layers.

6) Can I use it when my skin is sensitive?

It can be used for sensitive skin too unless they are allergic to spicule. This product is not to make the skin sensitive, but to improve it, and therefore making your skin healthy.

Sea + Energy Technology – Formulated with marine-derived spicules that deliver regenerative energy deep into the dermis.

Seanergy Peel PowderThe natural seaweed spicule Hydrolyzed Sponge from the deep clean ocean stimulates deep into the skin dermal layer, so it helps solve troubled skin and promotes making new skin cells.

Seanergy Peel SolutionWhen you mix Seanergy Peel Powder with Seanergy Peel Solution, Seanergy peel’s powder ingredients help to absorb into the skin. Also, as it has skin calming effects and active immune system features, it helps to reproduce vitalized skin.

Natural Ingredients – Made from safe, ocean-sourced components with no harsh chemicals.

True Biological Peeling – Removes embedded micro-particles and facilitates natural shedding of dead skin after 3 days.

Improves Skin Texture – Helps reset the skin’s turnover cycle for softer, smoother, and more elastic skin.

Induces skin regeneration by activating dermal cells.
Strengthens the skin’s immune system, helping improve resilience.
Soothes and moisturises even during the peeling cycle.
Supports Acne & Scar Management Care by encouraging fresh, healthy new skin.
Refines texture and tone, minimising roughness and dullness.

● Seanergy Peel Powder 1.3g × 5 vials
● Seanergy Peel Solution 8ml × 5 vials
(1 box total)

Ingredient List

Seanergy Peel Solution:
Water, Glycerin, Propylene Glycol, Alcohol, Butylene Glycol, Phenoxyethanol, Polysorbate 20, Hydrolyzed Collagen, Ethylhexylglycerin, 1,2-Hexanediol, Disodium EDTA, Rosmarinus Officinalis (Rosemary) Leaf Oil, Aloe Barbadensis Leaf Juice Powder, Sodium Hyaluronate, Apium Graveolens (Celery) Extract, Oryza Sativa (Rice) Extract, Brassica Oleracea Capitata (Cabbage) Leaf Extract, Brassica Rapa (Turnip) Leaf Extract, Solanum Lycopersicum (Tomato) Fruit/Leaf/Stem Extract, Daucus Carota Sativa (Carrot) Root Extract, Brassica Oleracea Italica (Broccoli) Extract, Limonene

Seanergy Peel Powder
Hydrolyzed Sponge, Camellia Sinensis Leaf Powder, Ocimum Basilicum (Basil) Leaf Powder, Hordeum Vulgare Leaf Powder, Melia Azadirachta Leaf Powder

Shelf life: 2 years unopened
After opening: Use within 2 weeks
Storage: Keep refrigerated with lid secured after opening

1) Preparation

  1. Cleanse the face using Stayve Mild Cleansing Milk.

  2. Apply or mist Stayve Hydrating Rose Toner to refine the skin.

  3. Apply anaesthetic cream for 30 minutes, then remove fully before the start of treatment.

  4. Mix the Seanergy Peel Powder and Solution according to your preferred intensity.

Use the table below to select the ideal powder-to-solution ratio based on your desired peeling intensity and treatment area.

    Area Peeling Intensity Powder Amount Solution Amount
    Face Mild Peeling 0.35g (one-third vial of powder) 2.5ml (one-third vial of solution)
    Medium Peeling 0.65g (half vial of powder) 4ml (half vial of solution)
    Strong Peeling 1.3g (one whole vial of powder) 8ml (one whole vial of solution)
    Back (entire surface) Medium Peeling 1.3g (one whole vial of powder) 8ml (one whole vial of solution)
    Strong Peeling 2.6g (two whole vials of powder) 16ml (two whole vials of solution)

    2) Treatment

    1. Work in this order: cheeks → forehead → nose.

    2. Apply the mixture and begin gentle pressing known as "rubbing".

    3. Rub for 2–3 minutes per area, reapplying solution as needed.

    4. Once rubbing is complete, lightly press over all treated areas.
      Avoid harsh rubbing around on the sensitive skin such as eyes and mouth area, but lightly press it.

    3) Removing Residue

    ● Use a damp sponge or gauze to gently wipe off residue.
    ● Do not wipe aggressively, as this may reduce the spicule effect.
    ● Mild tingling  is normal and expected.

    4) Finish

    ● Apply a cold sheet mask to soothe and hydrate the skin.
    ● Follow with Stayve Booster Ampoule (according to skin type) and Stayve Repair Cream.

    Important Precautions

    Do not exceed 6–8 minutes of total rubbing time.
    ● If mixture feels dry, you may add a basic hydrating facial mist (no alcohol, AHA, BHA, PHA, or oils).
    ● Always apply sunscreen post-treatment.
    ● Hand hygiene before and after treatment is essential.
    ● Itchiness during granulation is expected—do not scratch or peel forcibly.
    It is natural for the skin to tingle when rubbing or after rubbing (around 1 ~ 2 days).
    Lightly cleanse your face a day after the treatment. Do not use cleansers that contain exfoliating ingredients such as scrubs, AHA, BHA, and etc.
    ● Avoid sweating activities: exercise, sauna, spa, alcohol are prohibited.
    ● Avoid functional cosmetics such as whitening/anti-wrinkles that contain retinol as an ingredient.
    ● Not recommended for those with very thin skin.
    ● Perform a patch test if you have sensitive or problematic skin.

    Disclaimer

    The Seanergy Peel Solution & Powder are meant for professional use. Consult a skincare professional if unsure. Not intended for medical diagnosis, treatment, or cure.

    GOT ANY QUESTIONS?

    Talk to an expert!

    Schedule a call